Open Register

The following steps are used to open a register at the beginning of a work schedule.

 

 

Open Register

Follow the steps below to open the register. Note: If you are using a non-cash terminal, no bill or coin quantities should be entered, just select the Open button in the bottom right corner.

 

Step

Action

1

In the field provided, enter the number of bills and coins for each denomination. You can also use the plus and minus buttons to change the quantity.

openreg.jpg

2

Press the Open button.  The value of the count is automatically calculated in the total.

register_-_open2.png

3

Press OK to continue.

register_-_open3.png

4

To close the register go to the Menu button and select Close Register.

close_menu.png

5

Enter the number of bills and coins for each denomination. You can also use the plus and minus buttons to change the quantity. The Expected amount is listed at bottom of screen. Select the Close button to finish.

close_button.png

Note: If you are using a non-cash terminal, no bill or coin quantities should be entered, just select the Close button in the bottom right corner.